Warning:
Although the Uspa electronic bidet seat is moderately easy to install, it's recommended you secure the services of a qualified plumber / electrician for the installation. For further information, please feel free to contact us.
REQUIREMENTS
The Uspa electronic bidet seat must be installed over the toilet bowl in the place of the normal toilet seat. Not all toilets are suited to the shape and dimensions of our bidet seats. Before purchasing, please ensure your toilet complies with the following requirements:
| 1. |
Power. (AC 230V 50Hz) must be available with in 1.5 M from the toilet (The power cable supplied is 1.8 M long), if not please arrange with a qualified electrician to install a power supply. The power must be installed and connected to comply with the appropriate Electrical Installation Regulations applicable in your region / territory. Please contact an authorised electrician before installation to ensure compliance with all applicable Electrical installation regulations.
|
| 2. |
A water isolation valve for the toilet tank must be fitted if this is not installed please contact a plumber to arrange for installation. |
| 3. |
Available water pressure must be between 0.05 mPa and 0.74 mPa (optimum water pressure is between 0.09 mPa and 0.68 mPa). (0.01 Mpa = 0.1bar / 1.4Ilb per sq in) |
| 4. |
Toilet bowl dimension must be measured and comply with the diagrams to the right. Please check thoroughly which of our model best fits your toilet bowl. |
| 5. |
The surface of the toilet bowl where the toilet seat rests must be completely flat (without reliefs). |
| 6. |
For model SB-635: the mounting holes in the toilet bowl must be acccessable. |
| 7. |
Do not install the Uspa Bidet seat in any location where there is risk of freezing or frozen water pipes. |
|
Measures to check
 |
SB-635 (round shape)
A = 14 ~ 16 cm / 25,4 cm
B = 38 ~ 43 cm
C = min. 33 cm
D = min. 45 cm
E/F
= min. 28 cm
|
UB-6235/UB-6210
elongated shape
A = 14 ~ 22 cm
B = 37 ~ 43 cm
C = min. 35 cm
D = min. 46 cm
E = min. 28 cm
F = min. 21 cm
|
UB-6235/UB-6210
round shape
A = 14 ~ 22 cm
B = 34 ~ 40 cm
C = min. 32 cm
D = min. 43 cm
E = min. 28 cm
F = min. 21 cm
|
| UB-6035R elongated shape
A = 14 ~ 22 cm
B = 37 ~ 43 cm
C = min. 35 cm
D = min. 46 cm
E = min. 23 cm
F = min. 21 cm
|
UB-6035R round shape
A = 14 ~ 22 cm
B = 34 ~ 40 cm
C = min. 32 cm
D = min. 43 cm
E = min. 23 cm
F = min. 21 cm
|
|
